Low-Key Hillclimbs 2015

It's time once again for the Low-Key Hillclimbs, and this will be the 20th anniversary of the first edition, when Kevin Winterfield and I brashly organized a series of 12 consecutive weekly climbs extending from October through almost Christmas. And the amazing thing is we pulled it off. I'm less brash now but I don't need to be: I have fantastic support in putting the series on and so far we've had minimal interference. It's really been a wonderful thing.

I've got some decent fitness this year after having ridden SuperTour, organized by Sid and Linda Fuhrer, then raced the Mt. Tam Hill Climb and the Fremont Peak Hill Climb. For the first time in years I've actually been focusing on training instead of riding, and it's helped, starting with the fantastic dose of base I got from SuperTour. My time at Fremont Peak wasn't what I wanted, although I rode fairly well at Mt. Tam the week before. It was particularly hot at Fremont Peak so that took its toll.

But for Low-Keys, I'm coordinating week 1 so I don't get to see how I'm doing there until week 2, Page Mill Road. I really look forward to that one -- it's a classic time and makes for a great competition with its variable grade and fantastic views. Then week 3 is Alba Road, a climb we've done only once before in 2009. Then Mill Creek for week 4, a road I've never ridden but a short and intense climb which will be done as a time trial. Week 5 is a GPS-timed climb up Purisima Creek trail, a really fantastic off-road climb which is accessible to all bike types. Then week 6: Bohlman, but without On Orbit. The only year we tried that before was 1998 when it got canceled due to weather. Week 7 is OLH (wink, wink) which is the climb for which times matter. Week 8: Mountain Charlie, another Low-Key first. Then Mt. Hamilton and it's another Low-Key wrap.

The forecast has been for a wet fall so hopefully Low-Key luck with the weather and we squeeze them all in.

Comments

Post a Comment

Popular posts from this blog

Marin Avenue (Berkeley)

Image
On Saturday, I got an email from Tim telling letting me know that Murphy's Spring Classics was going to start up Marin Ave. I'd missed that. Murphy announces his courses the day before, and indeed it was already well into the night before when the course announcement went out. I'd skipped over the details, jumping straight to middle and end games. Marin? I laughed at the irony, because not long before when he'd told me he was choosing to repeat the Nifty Twn Fifty which we'd done together last year versus selecting Murphy Mack's Stage Mullett two-day, I responded I didn't think I had it in me to ride Marin Ave two years in succession. Well, so much for that. I was committed, so I went downstairs to swap my 11-26 cassette for my Recon 12-27. The name is easily overlooked: "Marin Ave" fails to strike the same impression as, for example, "Redwood Gulch" or "China Grade". But among those in the know, Marin Ave is infamous i
Read more

hummingbird feeder physics

Image
I couldn't figure out how the hummingbird feeder worked. Why didn't it overflow? Forces need to balance, of course. Neglecting surface tension, there liquid level is higher in the inner reservoir than in the feeding chamber, so there must be a corresponding pressure difference. Suppose the pressure in the inner chamber were zero. Then the column height difference would need to be atmospheric pressure / (density of liquid × gravity). But this is over 9 meters! Obviously the height difference is only approximately 1% of this. So the pressure difference inside versus outside is only approximately 1%. The inside is only slightly below atmosphere. So air is getting in. How? Does it diffuse through the liquid? If this were the dominant mechanism, it wouldn't take long for the pressure inside to go from 99% to 99.3%, for example, which should be plenty to push the column of liquid down in the inside chamber and thus push liquid out through the holes. It would over
Read more

Gallium Pro geometry

Image
On Caltrain yesterday, I was surprised to see among the usual set of commuting bikes a SRAM Red-equipped Argon Gallium Pro. The bike immediately stole your attention. The design was one which has been trending: clear-coated carbon with plenty of text detail so the viewer is sure to realize he's gazing upon the result of advanced, proprietary engineering and not at yet another paint job on the same old OEM frames being pumped out of the same old Taiwanese factories. But it worked: the bottom bracket area was huge, the downtube a large-diameter "inverted Kamm tail" design seemingly designed to maximize wind resistance, the top tube a broad, eccentric shape which screamed "vertically compliant yet torsionally stiff". All it lacked were the pencil-think seat stays Cervelo popularized, but this was a machine designed for stiffness over anything else. It seemed dramatic overkill, since the bike was small (the Argon "XS" I suspect). There wasn't muc
Read more