VeloViewer mileage summary and Strava OLH times

This blog has been neglected due to other activities, in particular the final weeks of the 2014 Low-Key Hillclimbs, but additionally due to a transition in my work life. I've been at my present job starting October 2010 through today, but that will be changing the beginning of 2015.

This period roughly coincides with my time on Strave. For aggregated those data, VeloViewer is a great tool. They just implemented an annual ￡10 fee to access full data, and it's paid off in this one plot.

2014 started off very mediocrely. I focused on trail running until April, and that hurt my total mileage, but it ended with a very successful debut at the 50 km distance, the Woodside Ramble. Then there was a downtime associated with preparing for and actually moving to a new place in San Francisco. Starting in September, however, I recovered, with 4 very solid weeks end-of-September-to-start-of-October in Switzerland. After that I did fairly well, participating in Low-Key Hillclimbs, and getting in a decent number of SF2G rides. You can see the slope has been fairly good, even if total mileage is well below the level of 2012.

Strava just recently introduced a segment time plot, which is really nice. Here's mine for the "Low-Key Old La Honda" segment. Old La Honda times, mostly riding the Ritchey Breakaway on the Wednesday Noon Ride, have been quite stable this year and last, quite a bit slower than 2011, but what can you do... 2010 was a slow year since I wasn't able to train as much as I'd like, with the work transition.

I never felt at my best on Old La Honda this year. But since my present work plans take me to Berkeley, I don't know when I'll have an opportunity to do the Nooner again. Maybe I need to plan a weekend trip via Caltrain to give it a go when I have some cycling fitness next.

Comments

Post a Comment

Popular posts from this blog

Marin Avenue (Berkeley)

Image
On Saturday, I got an email from Tim telling letting me know that Murphy's Spring Classics was going to start up Marin Ave. I'd missed that. Murphy announces his courses the day before, and indeed it was already well into the night before when the course announcement went out. I'd skipped over the details, jumping straight to middle and end games. Marin? I laughed at the irony, because not long before when he'd told me he was choosing to repeat the Nifty Twn Fifty which we'd done together last year versus selecting Murphy Mack's Stage Mullett two-day, I responded I didn't think I had it in me to ride Marin Ave two years in succession. Well, so much for that. I was committed, so I went downstairs to swap my 11-26 cassette for my Recon 12-27. The name is easily overlooked: "Marin Ave" fails to strike the same impression as, for example, "Redwood Gulch" or "China Grade". But among those in the know, Marin Ave is infamous i
Read more

hummingbird feeder physics

Image
I couldn't figure out how the hummingbird feeder worked. Why didn't it overflow? Forces need to balance, of course. Neglecting surface tension, there liquid level is higher in the inner reservoir than in the feeding chamber, so there must be a corresponding pressure difference. Suppose the pressure in the inner chamber were zero. Then the column height difference would need to be atmospheric pressure / (density of liquid × gravity). But this is over 9 meters! Obviously the height difference is only approximately 1% of this. So the pressure difference inside versus outside is only approximately 1%. The inside is only slightly below atmosphere. So air is getting in. How? Does it diffuse through the liquid? If this were the dominant mechanism, it wouldn't take long for the pressure inside to go from 99% to 99.3%, for example, which should be plenty to push the column of liquid down in the inside chamber and thus push liquid out through the holes. It would over
Read more

Gallium Pro geometry

Image
On Caltrain yesterday, I was surprised to see among the usual set of commuting bikes a SRAM Red-equipped Argon Gallium Pro. The bike immediately stole your attention. The design was one which has been trending: clear-coated carbon with plenty of text detail so the viewer is sure to realize he's gazing upon the result of advanced, proprietary engineering and not at yet another paint job on the same old OEM frames being pumped out of the same old Taiwanese factories. But it worked: the bottom bracket area was huge, the downtube a large-diameter "inverted Kamm tail" design seemingly designed to maximize wind resistance, the top tube a broad, eccentric shape which screamed "vertically compliant yet torsionally stiff". All it lacked were the pencil-think seat stays Cervelo popularized, but this was a machine designed for stiffness over anything else. It seemed dramatic overkill, since the bike was small (the Argon "XS" I suspect). There wasn't muc
Read more