Recommended Peninsula rides

A Canadian rider asked WeightWeenies forum about good rides to do for a racer visiting Santa Clara county (the San Francisco Bay area) on business. Cara recommended I post the list here, so here it goes. These are rides taking place now, in February. More options open up during Daylight Savings time. And, for example, the fall offers the the Low-Key Hillclimbs, near and dear to yours truly.

A description of local climbs is available from Stanford Cycling. This wonderful compilation is largely the work of Sergei Morozov, who unfortunately last time I checked was in exile in New York City. A frustrating fate for a climbing addict....

Keith Vetter's Klimb is a must-see route tracking utility for the San Francisco Bay area and Sonoma. It runs on a broad range of platforms. If you are thinking of charting out a route, you really need to give this a look. It's largely based on Bill Bushnell's comprehensive statistics, meticulously collected in the 1990's.

Another must-have local resource is The Krebs cycling map. It's not available at a bike shop in the Bay area, it's probably just because it's out of stock.

Local rides worth checking out, off the top of my head. There's others: a more comprehensive, not 100% up-to-date, list is maintained by Fremont Freewheelers:
  • The Palo Alto Morning Ride: leaves 6:20am Tue & Thu from Starbucks on University Ave. Fast group ride with sprints.
  • The Noon Ride, leaves noon SHARP from Page Mill and Old Page Mill near Foothill/Junipero Serra:
    • Mon: short, moderate pace,
    • Tue: race pace, longer. For example, here's motionbased data of the Corte Madera route.
    • Wed: climb OLH (390 vertical meters), descend 84. For example, here's some of Chris Hipps' data.
    • Thu: like Tue.
    • Fri: like Mon but longer, blast over short hill at end with sprint after.
    You can find data for these rides from MotionBased.
  • Wed 9:10 am, Peets in Los Altos, Dave's Morning Ride: epic stuff. Really high quality riders, friendly, quality race training. Of course, work has a pesky tendency to get in the way of this one.
  • Saturday: Spectrum Ride, approx 9:15 am from Los Altos (Foothill @ Edith) catching the group which starts 9am further south. Similar to Tue/Thu noon ride, but faster.
  • Saturday, Peets in Los Altos, 9:10 am: Alto Velo B ride: a moderate pace group ride with climbing with generous regroups.
  • Sunday, Peets in Los Altos, 9-9:10 am: Alto Velo A ride: a fast group ride with considerable climbing and limited regroups. Hard road race training.
  • sanctioned races: See http://www.ncnca.org/ and http://www.ncncaracing.com/
  • The Beat the Clock Series raises money for the the Lance Armstrong Foundation with its occasional time trials on Canada Road starting at 7:30 am.
  • touring rides: interesting routes, with very generous regroups: Western Wheelers . Also Grizzly Peak Cyclists and the Alameda County Touring Cyclists occasionally organize group rides on the Peninsula.

Comments

Post a Comment

Popular posts from this blog

Marin Avenue (Berkeley)

Image
On Saturday, I got an email from Tim telling letting me know that Murphy's Spring Classics was going to start up Marin Ave. I'd missed that. Murphy announces his courses the day before, and indeed it was already well into the night before when the course announcement went out. I'd skipped over the details, jumping straight to middle and end games. Marin? I laughed at the irony, because not long before when he'd told me he was choosing to repeat the Nifty Twn Fifty which we'd done together last year versus selecting Murphy Mack's Stage Mullett two-day, I responded I didn't think I had it in me to ride Marin Ave two years in succession. Well, so much for that. I was committed, so I went downstairs to swap my 11-26 cassette for my Recon 12-27. The name is easily overlooked: "Marin Ave" fails to strike the same impression as, for example, "Redwood Gulch" or "China Grade". But among those in the know, Marin Ave is infamous i
Read more

hummingbird feeder physics

Image
I couldn't figure out how the hummingbird feeder worked. Why didn't it overflow? Forces need to balance, of course. Neglecting surface tension, there liquid level is higher in the inner reservoir than in the feeding chamber, so there must be a corresponding pressure difference. Suppose the pressure in the inner chamber were zero. Then the column height difference would need to be atmospheric pressure / (density of liquid × gravity). But this is over 9 meters! Obviously the height difference is only approximately 1% of this. So the pressure difference inside versus outside is only approximately 1%. The inside is only slightly below atmosphere. So air is getting in. How? Does it diffuse through the liquid? If this were the dominant mechanism, it wouldn't take long for the pressure inside to go from 99% to 99.3%, for example, which should be plenty to push the column of liquid down in the inside chamber and thus push liquid out through the holes. It would over
Read more

Gallium Pro geometry

Image
On Caltrain yesterday, I was surprised to see among the usual set of commuting bikes a SRAM Red-equipped Argon Gallium Pro. The bike immediately stole your attention. The design was one which has been trending: clear-coated carbon with plenty of text detail so the viewer is sure to realize he's gazing upon the result of advanced, proprietary engineering and not at yet another paint job on the same old OEM frames being pumped out of the same old Taiwanese factories. But it worked: the bottom bracket area was huge, the downtube a large-diameter "inverted Kamm tail" design seemingly designed to maximize wind resistance, the top tube a broad, eccentric shape which screamed "vertically compliant yet torsionally stiff". All it lacked were the pencil-think seat stays Cervelo popularized, but this was a machine designed for stiffness over anything else. It seemed dramatic overkill, since the bike was small (the Argon "XS" I suspect). There wasn't muc
Read more